and Assembling the Optional Color Upgrade Kit
3.2.7 Disassembling
3.2.7.1 Removing the MOTOR ASSY.,CS
1. Remove the CBB (M3 x 8) screw attaching the MO~R ASSY.,CS to the COVER,CS.
2. Release the 2 clips attached to the COVER,CS.
3. Remove the MOTOR ASSY.,CSwith the BOARD ASSY.,CS from the COVER,CS.
Remove the GEAR,CAM,CS
3.2.7.2
1.
Remove the MOTOR ASSY.,CS (see Section 3.2.7.1).
2. Remove the E-ring3 from thecolorcam shaft.
3. Remove the GEAR,CAM,CS.
3.2.7.3 Removing the Color Ribbon Sensor
1.
Remove the MOTOR ASSY.,=and the BOARD ASSY.,CS(see Section3.2.7.1).
2. Remove the E-ring4 from the cartridge holder shaft.
3. Remove the HOLDER,CARTRIDGE,COLOR from the M~R ASSY.,CS.
4. Release the clip that attaches the HOLER,CARTRIDGE,COLOR to the color ribbon sensor.
5. Remove the color ribbon sensor comector from the BOARD ASSY.,CS.
Figure 3-20. Disassembling the Optional Color Upgrade Kit
BOARD ASSY..CS
3-19