Clock Internal/External; Save To Disk - Korg SQD-8 Owner's Manual

1:1: Thus it will be changed into the music of the
following rhythm.
*
Otherwise it will be changed into
unexpected music with different QUAN-
TIZE.
I
CLOCK INTERNAL/EXTERNAL
I
Q) Push FUNCTION select keyf) to set function
mark (
~
) display to UTILITY. (utility
function)
Tempo indication of display will be Inc or
Ec.
Inc .... internal clock
: It operates the clock in the SQD-8.
Ec .... external clock
: It operates the clock from outside
(drum machine, etc.)
In this case echo back is unavailable.
@ If "CLOCK INT/EXT" key (TRACK (i)key) is
pushed, indication alternates.
1:1: When power supply is turned on, it is always
set to internal clock.
1:1: As to function of measure memory, see p.
I
SAVE TO DISK
I
The operations described so far were stored in
the internal memory. Once power supply is cut
off, however, all data will be erased. But data
can be stored by copying the data to a QD (quick
disk). (this is called save.) So don't fail to save
before the power supply is cut off.
o
Disk to be used in SQD-8 is QD (quick disk).
Use KORG QD-10, etc.
1:1: Confirm that nail to protect QD is not
broken before SAVE. Take care as all
original data memorized on QD will
disappear by SAVE.
Q) Push QD into disk drive
4D
so that it clicks
in place.
~ -CJ'---'
, 0 '
~
o
®
Push FUNCTION f) select key to set
function mark (
~
) display to QD. (QD
function)
~ QD
PLAY
REAL TIME REC
STEP REC
ERASE
UTILITY
®
When SAVE key
Qj)
is pushed, SAVE starts.
"SA VE" is indicated in MEASURE indica-
tion display.
SA VE will finish about 4D to
~
seconds
later: When finished, 'SAVE" will
disappear.
cD
Push eject button 4D to take out QD.
1:1: Break nail for data-protect, which is
attached to QD, not to erase saved data by
mistake, so that nothing can be written
again on the disk. QD with important data
should be kept this way.
-17 -