Upgrading From Hp Configtailor 1.0 To Hp Configtailor 1.1 - HP Kayak XA 05xx Implementation Manual

NOTE
Using this information, you can compare the current version of the
driver stored in the deployment database with the latest versions
available on Hewlett-Packard's Web Site which you can link to directly
from this window (the URL is http://www.hp.com/go/kayaksupport).
Upgrading from HP ConfigTailor 1.0 to HP
ConfigTailor 1.1
If you have already created a deployment database using HP
ConfigTailor 1.0, you can easily update to HP ConfigTailor 1.1 without
losing any of your existing deployment database contents or
configuration profiles.
1 While running Windows NT 4.0 on your deployment database server,
insert the HP ConfigTailor 1.1 CD-ROM into the CD-ROM drive. The
CD-ROM's AutoRun feature will open up the HP ConfigTailor
Welcome screen on your default web browser (see page 12).
2 On the menu bar on the left side of the screen, click Update From
Version 1.0 to 1.1. The web browser will automatically scroll to a
short description of how to update to the latest version of HP
ConfigTailor. Click Go to begin the update.
3 HP ConfigTailor's setup utility will start and the installation screen
will appear. After a few moments, a screen will appear telling you
that a previous installation of HP ConfigTailor has been detected. HP
ConfigTailor 1.1 will be installed in the same destination folder as the
previous installation, thereby upgrading your deployment database.
Select Yes and click Next to continue.
Note that you cannot install HP ConfigTailor 1.1 to a new destination
folder on a server which already has a previous HP ConfigTailor
installed. You must either upgrade your existing HP ConfigTailor
deployment database, or install HP ConfigTailor 1.1 on a different server
using the procedure described in "Installing HP ConfigTailor 1.1" on
page 12.
3 Maintaining Your Deployment Database

Upgrading from HP ConfigTailor 1.0 to HP ConfigTailor 1.1

English 39