Add/Remove Packages - HP Kayak XA 05xx Implementation Manual

3 Maintaining Your Deployment Database

Add/Remove Packages

In addition to describing the above utilities, this chapter will also
explain how to:
Upgrade your HP ConfigTailor 1.0 deployment database to HP
•
ConfigTailor 1.1 in order to take advantage of HP ConfigTailor's
latest features, while keeping your existing configuration profiles.
Refer to "Upgrading from HP ConfigTailor 1.0 to HP
ConfigTailor 1.1" on page 39.
Add new HP Kayak PC Workstation platform support to your
•
deployment database (refer to "Adding Platform-Support to your
Deployment Database" on page 42).
Add/Remove Packages
Software packages can be added or removed from the deployment
database using the Add/Remove Packages utility. You can access the
utility by selecting Start>Programs>HP ConfigTailor>Add/Remove
Packages or by clicking on the Add/Remove Packages icon in the HP
ConfigTailor toolbar (HP ConfigTailor 1.1 only). The window shown
below will appear explaining that this utility is used to add or remove a
software package from the deployment database.
32 English