HP Kayak XA 05xx Implementation Manual page 17

3 The Setup utility will open an HP ConfigTailor Installation screen.
The installation procedure is as follows:
a Select the HP Kayak PC workstation models that you will have as
clients. The platforms that you select will determine which device
drivers will be available on the deployment database. You must
select at least one platform.
b Select the language version(s) of Windows NT 4.0 you would like
installed. You may choose up to six versions: English, French,
Italian, German, Spanish and Japanese. It is not necessary to
select an operating system version at this time—you may do so
once the installation of HP ConfigTailor setup utility is complete.
Refer to "Add/Remove Operating System Version" on page 36, for
more information.
c Specify which folder you would like to install HP ConfigTailor
into. The folders that HP ConfigTailor will create are by default:
c:\program files\HP ConfigTailor\HP Software\..
for software utilities and applications
and
c:\program files\HP ConfigTailor\OS Versions\..
for NT 4.0 operating system files.
If you choose to install HP ConfigTailor on a drive different than
the default, you must first create the folder structure on the
drive you would like to install to, and then browse for these
folders when prompted for the path.
d The packages contained on the HP ConfigTailor CD-ROM (device
drivers and software applications) will now be copied to your
server.
e After the packages have been copied, you will be requested to
remove the HP ConfigTailor CD-ROM and insert the Windows NT
4.0 and Service Pack CD-ROMs. The required operating system
files will then be copied to your server.
2 How to Create a Deployment Database
Installing HP ConfigTailor
English 13