HP Kayak XA 05xx Implementation Manual page 25

Creating and Modifying Configuration Profiles using the Configuration Wizard Utility
workstation platforms are used. When the users of the client PC
workstations perform a remote installation from the deployment
database, HP ConfigTailor 1.1 will detect the platform type and load the
appropriate software list automatically. The remote installation
procedure is described in Chapter 4, on page 43.
Configuration profiles are stored in files with the name profile.ini,
where profile is a name you choose when creating the profile.
Follow these steps to create or modify a configuration profile:
1 Open Configuration Wizard by clicking on its icon in the toolbar or by
selecting Start>HP ConfigTailor>Configuration Wizard. A
Configuration Wizard window, as shown
the choice between adding a new configuration profile or modifying,
duplicating or removing an existing profile.
1. Only the HP ConfigTailor 1.1 version is shown. The HP ConfigTailor 1.0
version is similar but does not contain icon-links.
2 How to Create a Deployment Database
1
below, will open giving you
English 21