HP Kayak XA 05xx Implementation Manual page 14

2 How to Create a Deployment Database
Installing HP ConfigTailor
2 Read the entire welcome screen. It explains that you can either use
the HP ConfigTailor CD-ROM to set up a software deployment
database on the server of your choice, or locally install HP-supplied
software directly from the CD-ROM onto your Kayak PC
Workstation. Under System Administrator Tasks, you will see two
options. Click on "Create a deployment database".
3 A screen entitled "Create a Deployment Database" will appear in
your browser window. This screen describes the steps to follow to
create a software deployment database on a server. In step 1, you will
be invited to "Click Here" to create a deployment database. By
clicking on the mouse, you will launch HP ConfigTailor's Setup
utility.
4 The Setup utility will open an HP ConfigTailor Installation screen.
The installation procedure is as follows:
a Select the language version(s) of Windows NT 4.0 you would like
installed. You must choose at least one operating system version,
but you may choose up to six versions if desired. The Windows
NT 4.0 language versions supported are: English, French, Italian,
German, Spanish and Japanese.
b Specify which folder you would like to install HP ConfigTailor
into. The folders that HP ConfigTailor will create are by default:
c:\program files\HP ConfigTailor\HP Software\..
for software utilities and applications
and
c:\program files\HP ConfigTailor\OS Versions\..
for NT 4.0 operating system files.
If you choose to install HP ConfigTailor on a drive different than
the default, you must first create the folder structure on the
drive you would like to install to, and then browse for these
folders when prompted for the path.
c The packages contained on the HP ConfigTailor CD-ROM (device
drivers and software applications) will now be copied to your
server.
10 English