HP Kayak XA 05xx Implementation Manual page 33

NOTE
Creating and Modifying Configuration Profiles using the Configuration Wizard Utility
you choose is large enough to hold all the components that you
intend installing on the client PC workstations that use this
configuration profile.
For the situation where the current FAT16 partition on the client
PC workstation is larger than the partition size you have defined,
you can choose to reduce the partition to the size you defined
above, or to leave it as it is.
Changing the partition size will cause the entire hard disk drive of the
client PC workstation to be reformatted during installation. If you do not
change the partition size, only the primary partition will be reformatted.
Refer to page 44 for more information.
You can also choose to convert the installation partition to NTFS
format after installation. In general, it is recommended that you
only convert partitions of more than 4GB to NTFS format.
2 How to Create a Deployment Database
English 29