Onboard Administrator Troubleshooting - HP BL260c - ProLiant - G5 Troubleshooting Manual

Step
Step 7

Onboard Administrator troubleshooting

The Onboard Administrator manages the power, cooling, configuration, and status of the enclosure.
For more information, see the Onboard Administrator documentation on the HP website
(http://www.hp.com/support).
For specific component LED definitions and component identification, see "Component identification (on
page 72)."
Symptoms: Onboard Administrator errors
Symptom
The Onboard Administrator health LED is
off, and only one Onboard
Administrator is installed.
The Onboard Administrator health LED is
off on one Onboard Administrator, and
Onboard Administrator health LED is
green on the second Onboard
Administrator.
The Onboard Administrator health LED is
off on both Onboard Administrators.
The Onboard Administrator LED is red.
Procedures: Onboard Administrator errors
CAUTION:
avoid possible data loss, always secure permission before powering down an enclosure.
CAUTION:
Display shows a firmware update in progress. During this activity, the Insight Display displays
the Firmware Update screen with the Lock icon and the firmware update progress bar.
Partner blade errors action and verification
Verification
If the partner blade health LED is green, then the OA tray failed. The repair is complete.
If the partner blade health LED is off, then the original OA tray did not fail. Reinstall the
original OA tray:
1 Remove the OA tray.
2 Install the original OA tray.
3 Continue to the next step.
Action
Contact an authorized service provider to complete the midplane assembly replacement
(on page 69).
Initial step
—
—
—
—
Some troubleshooting procedures require powering down an entire enclosure. To
To avoid data loss, do not remove an Onboard Administrator when the Insight
Required steps
Begin with step 1.
Begin with step 2.
Begin with step 1.
Begin with step 2.
Enclosure troubleshooting 46