HP BL260c - ProLiant - G5 Troubleshooting Manual page 68

Step Insight Display reports blue device errors action and verification
Step 5 Action
Determine that the server blade is powered on using one of the following methods:
•
Use the Onboard Administrator web-based interface.
•
Use the server blade LEDs.
A server blade that is powered off appears as a dark green device on the Insight
Display. If the Onboard Administrator Power Delay/Sequencing function is enabled, a
device that is delayed during power-up sequencing is blue on the Insight Display.
Verification
Wait for the Onboard Administrator power-on to complete.
When powered-on, if the device appears green on the Insight Display Health Summary
screen, then the repair is complete.
If the device appears blue after completion of the power-on delay sequencing, continue
to the next step.
Step 6 Action
Remove the device in the blue bay, and then install it into a known-working bay.
Verification
If the Insight Display reports the device as blue in the known-working bay, then the
device may be defective. Install a known-working device in the original bay. The repair
is complete.
If the Insight Display reports the device as green when installed in the known-working
bay, continue to the next step.
Step 7 Action
Remove the original device from the blue bay, and then install a known-working device.
Verification
If the Insight Display reports the newly installed device as blue, then the device bay may
be defective. Contact an authorized service provider to complete the midplane assembly
replacement (on page 69).
Enclosure troubleshooting 68