Insight Display Blue Device Errors - HP BL260c - ProLiant - G5 Troubleshooting Manual

Insight Display blue device errors

For specific component LED definitions and component identification, see "Component identification (on
page 72)."
Symptoms: Insight Display reports blue device errors
Symptom
The Insight Display Health Summary
screen reports a device bay with a
"blue" color.
After rebooting the Onboard
Administrator, it can take up to 5
minutes for all start-up processes to
complete. During this time, various
devices and fans may display a
blue status.
The Insight Display Health Summary
screen shows a fan bay with a blue
color.
Procedures: Insight Display reports blue device errors
CAUTION:
avoid possible data loss, always secure permission before powering down an enclosure.
CAUTION:
Display shows a firmware update in progress. During this activity, the Insight Display displays
the Firmware Update screen with the Lock icon and the firmware update progress bar.
Additional information
A long-lasting "blue" device color
indicates that the Onboard
Administrator does not
communicate properly with the
device in the specific enclosure
bay.
Several possible causes exist for
this condition:
•
The Onboard Administrator or
OA tray may not be installed
properly in the enclosure.
•
The device has not completed
the start-up process, which can
take several minutes per
device.
•
The iLO on the server blade
does not have an IP address.
•
When the Virtual Connect
modules are being used, the
server blade does not have a
VC profile.
•
The Onboard Administrator
power-on delay function has
not had time to complete the
power-on sequence.
Fans may not be located properly
in the appropriate bays.
Some troubleshooting procedures require powering down an entire enclosure. To
To avoid data loss, do not remove an Onboard Administrator when the Insight
Required steps
Begin with step 1.
Follow the instructions on the
Insight Display for proper fan
locations. Install fans in the correct
bay locations.
Enclosure troubleshooting 66