HP BL260c - ProLiant - G5 Troubleshooting Manual page 45

Step Partner blade errors action and verification
Step 3 Action
Remove the suspect partner blade and install a known-working partner blade.
Verification
If the partner blade health LED is green, then the repair is complete.
If the partner blade health LED is off, then the suspect partner blade has not failed.
Reinstall the original partner blade:
1 Remove the known-working partner blade.
2 Install the original partner blade.
3 Continue to the next step.
Step 4 Action
If troubleshooting an HP BladeSystem c7000 Enclosure, then perform the following
substeps:
1 Remove all Onboard Administrators.
2 Reseat the OA tray.
3 Install all Onboard Administrators.
If troubleshooting an HP BladeSystem c3000 Enclosure, reseat the Onboard
Administrator.
Verification
If the partner blade health LED is green, then the connection is restored. The repair is
complete.
If the partner blade health LED is off, then continue to the next step.
Step 5 Action
To troubleshoot the suspect Onboard Administrator, remove the suspect Onboard
Administrator and install a known-working Onboard Administrator or service spare part.
Verification
If the partner blade health LED is green, then the suspect Onboard Administrator failed.
The repair is complete.
If the partner blade health LED is off, then the suspect Onboard Administrator did not
fail. Continue as directed:
•
If troubleshooting an HP BladeSystem c3000 Enclosure, then continue to step 7.
•
If troubleshooting an HP BladeSystem c7000 Enclosure, then continue with the next
step.
Step 6 Action
Troubleshoot the OA tray:
1 Remove all Onboard Administrators.
2 Remove the OA tray.
3 Install a known-working or service spare OA tray.
4 Install all Onboard Administrators in their original OA bays.
Enclosure troubleshooting 45