HP BL260c - ProLiant - G5 Troubleshooting Manual page 36

For all removal and replacement procedures used in this document, see the appropriate server blade
maintenance and service guide on the HP website
(http://www.hp.com/go/bladesystem/documentation).
For specific component LED definitions and component identification, see "Component identification (on
page 72)." For server blade LED definitions and component identification, see the server blade user guide
or maintenance and service guide on the HP website
(http://www.hp.com/go/bladesystem/documentation).
Symptoms: Server blade errors
Error indication
An Insight Display location error is
reported for this device bay.
An Insight Display configuration error
is reported for this device bay.
An Insight Display power error is
reported for this device bay.
An Insight Display cooling error is
reported for this device bay.
An Insight Display device error is
reported for this device bay.
A server blade does not power up.
All server blade LEDs are off.
A server blade does not power up.
The following conditions exist:
•
The power LED is amber.
•
The health LED is flashing red.
•
The Insight Display device bay
status is yellow.
A server blade does not power up.
The following conditions exist:
•
The power LED is amber.
•
The health LED is green.
•
The Insight Display device bay
status is black.
Initial step
—
—
—
—
—
—
—
After each step, check the
device bay status on the Insight
Display Health Summary
screen. When the status
changes from black to another
color, the Onboard
Administrator detects the server
blade.
Required steps
To correct the issue, follow the Insight
Display steps.
To correct the issue, follow the Insight
Display steps.
To correct the issue, follow the Insight
Display steps.
To correct the issue, follow the Insight
Display steps.
If the Insight Display reports a server
blade thermal warning, then check
the iLO 2 IML log for specific thermal
zone reporting issues. Check that
area of the server blade for
obstructions and for proper heatsink
installation.
Examine the reported server blade
power LED and health LED. Follow
the steps indicated for the specific
symptom in this table.
Begin with step 1.
To correct the issue, follow the Insight
Display steps.
The server blade is not seated
properly in the device bay. Reseat
the server blade in the device bay.
The Insight Display device bay status
changes to dark green after the
server blade is detected. If the
symptom continues, perform the steps
beginning with step 2.
Enclosure troubleshooting 36