Cleaner Clutch 3 / Cleaner Cam Clutch 3 / Fuser Clutch 3 - Brother HL-3450CN Service Manual

CHAPTER 7 DISASSEMBLY & RE-ASSEMBLY
4.1.8

Cleaner clutch 3 / Cleaner cam clutch 3 / Fuser clutch 3

(1) Remove the outer plastic C ring from the shaft of each of the clutches.
(2) Pull out the cleaner clutch 3, Cleaner cam clutch 3 and fuser clutch 3 from their shafts at
the same time.
NOTE:
When re-assembling the clutches, identify each of them referring to the features below;
N
White gear (with no spring): Cleaner clutch 3
N
White gear (with a spring):
N
Black gear:
The cleaner cam clutch is identical to the TR cam clutch.
Cleaner cam clutch 3
C ring
C ring
Cleaner clutch 3
Fig. 7-16
Cleaner cam clutch 3
Fuser clutch 3
7-16
Fuser clutch 3
C ring