Brother HL-3450CN Service Manual page 141

CHAPTER 5 CONTROL PANEL OPERATION
Code No.
12-2
13
14-1
14-2
14-3
LCD Message
STACKER FULL
12 STACKER FULL
[*4]
REPLACE TONER
13 REPLACE [*5]
TONER [*4]
Display of [4]:
C:YT Y toner cartridge
C:CT: C toner cartridge
C:MT M toner cartridge
C:KT K toner cartridge
CHECK FUSER OIL
14 CHECK
FUSER OIL[*F0]
CHECK CLEANING ROLLER
14 CHECK CLEANING
ROLLER[*4][*FC]
CHECK WASTE TONER PACK
14 CHECK WASTE
TONER PACK[*4]
Description of Message
x
The engine is ready to print.
x
The Power LED is lit.
x
Remove the paper on the stacker
(paper exit tray), then press the -
button.
x
The engine is ready to print.
x
The Power LED is lit.
[*5]: The toner empty condition is
indicated by the color code as
follows;
Y: Yellow
M: Magenta
C: Cyan
K: Black
x
Replace the indicated toner cartridge
with a new one of the correct color.
x
The engine is idling.
x
The Power LED is lit.
x
Replace the fuser oil bottle with a new
one.
x
This message will be automatically
cleared by opening & closing the
paper exit cover.
x
The engine is idling.
x
The Power LED is lit.
x
Replace the fuser cleaner with a new
one.
x
Execute the Clear Care Mode after
the replacement of the fuser cleaner
to clear the Care Code [FC].
x
The engine is idling.
x
The Power LED is lit.
x
Replace the waste toner pack with a
new one.
x
This message will be automatically
cleared by opening & closing the front
cover while replacing the waste toner
pack. The message can also be
cleared by pressing the - button.
5-16