Brother HL-3450CN Service Manual page 166

47 TOTAL PAGE SET
This mode can reset the number of total pages in the NVRAM whenever NVRAM INITIAL
has been executed or the MCTL PWB is replaced.
NOTE:
Do not perform this mode other than when replacing the MCTL PWB.
Description of Procedures
1) Press the Reprint button after selecting
Screen (a) "TOTAL PAGE SET".
2) Select one type of page from among TOTAL
PAGE, LFU PAGE and DPL PAGE.
3) Use the Back or Set button to select the
desired digit.
Use the Reprint button to input values to the
selected (blinking) digit.
Upon completing the input of the values, use
the Back or Set button to select SET
displayed on the LCD and then press the
Reprint button to store the set value.
a)
o
(a) (b)
b)
o
(b) (c)
c)
c)
o
(c) (d)
c)
d)
5-41
HL-3450CN SERVICE MANUAL
LCD Message
39 FACTORY MODE
TOTAL PAGE SET
47 TOTAL PAGE
TOTAL/LFU/DPL
47 TOTAL PAGE
P
or
47 LFU PAGE
P
or
47 DPL PAGE
P
39 FACTORY MODE
DP CHECK