Base Cover 3 (L) - Brother HL-3450CN Service Manual

4.2.4

Base cover 3 (L)

(1) Remove the set screws BT4x10 (2 pcs.) from the base cover 3 (L).
(2) Remove the base cover 3 (L) from the base by releasing it from the front of the printer
first.
N
When re-assembling the base cover, insert the leading edge of the base cover 3 (L) into
the hook provided at the bottom (left and right) of the base plate.
N
Ensure that the projecting part (
plate bottom.
Fig. 7-31
PRECAUTION
) of the base cover 3 (L) goes into the hole in the base
Hole
(projecting part)
(hook)
Fig. 7-32
7-25
HL-3450CN SERVICE MANUAL
Base cover 3 (L)
Base plate
Base cover 3 (R)