Brother HL-3450CN Service Manual page 171

CHAPTER 5 CONTROL PANEL OPERATION
3.4.3 Confirmation and setting of total number of printouts
The total number of printouts is stored in the RAM. Confirmation and setting of total number
of printouts can be carried out on the control panel.
<Purpose>
Total number of printouts will be reset when changing the MCTL PWB or executing an
NVRAM INITIAL.
<Procedures of Setting>
3.4.4 Setting of number of images for each color
The number of printouts for each color (4 colors) is stored in the RAM. Confirmation and
setting of the number of images for each color can be carried out on the control panel.
<Purpose>
Number of images for each color will be reset when changing the MCTL PWB or executing
NVRAM INITIAL.
<Procedures of Setting>
(1) Execute 47 TOTAL PAGE SET in Factory Mode.
(2) Reset the total number of printouts.
(3) After making the setting, execute 34 TOTAL PAGE to confirm that the desired
number of printouts in now set.
(1) Execute 48 EACH IMAGE SET in Factory Mode.
(2) Reset the number of printouts for each color.
(3) After making the setting, execute 35 EACH IMAGE to confirm that the desired
number of images is now set.
5-46