Brother HL-3450CN Service Manual page 140

Code No.
11-1 CHECK MEDIA
11 CHK MEDIA [*1]
NO MEDIA UPP/LOW
CHK MEDIA TYPE UPP/LOW
CHK OUTER SELECTION
CHK MEDIA FOR DUPLEX
11-2 NO MEDIA
11 NO MEDIA
11-3 CHECK MEDIA FOR DUPLEX
11 CHK MEDIA [*1]
11-4 CHECK OUTER SELECTION
11 CHK OUTER [*1]
12-1 NO TRAY UPP/LOW
12 NO TRAY
LCD Message
TYPE [*4]
[*1]
[*4]
FOR DUPLEX[*4]
SELECTION [*4]
[*1]
[*4]
5-15
Description of Message
x
The engine is idling.
x
The Power LED is lit.
[*1]: Applicable paper feeder is indicated
as follows;
/UPP: Upper cassette
/LF1: Lower cassette (1)
/LF2: Lower cassette (2)
x
Confirm whether the applicable paper
cassette is loaded with paper.
x
Press the Job Cancel button if the
media needs to be changed.
x
The engine is idling.
x
The Power LED is lit.
[*1]: Applicable paper feeder paper empty
condition is indicated as follows;
/UPP: Upper cassette
/LF1: Lower cassette (1)
/LF2: Lower cassette (2)
x
Replenish the empty cassette with
paper.
x
The engine is idling.
x
The Power LED is lit.
[*1]: Applicable paper feeder paper empty
condition is indicated as follows;
/UPP: Upper cassette
/LOW: Lower cassette
/DPL: Duplex unit inside
x
Change media.
x
Change the media selection.
x
The engine is idling.
x
The Power LED is lit.
[*1]: Media check is indicated with the
following messages for each feeder;
/UPP: Upper cassette
/LOW: Lower cassette
x
Confirm the media cassette / paper exit
tray and reset the settings properly.
x
The engine is idling.
x
The Power LED is lit.
[*1]: Paper feeder without the paper
cassette is indicated as follows;
UPPER: Upper cassette
/LF1: Lower cassette (1)
/LF2: Lower cassette (2)
x
Install the applicable media cassette to
the paper feeder indicated on the LCD.
HL-3450CN SERVICE MANUAL