Brother HL-3450CN Service Manual page 353

APPENDIX
OEM FONT SELECT
BRO FONT SELECT
ISR FONT SELECT
300DPI PRIORITY
The special character set is necessary when the printer is supplied to the European
countries. For the HL-1260 printer, the special character set is stored into the
program ROM additionally. Since the font number is moved due to the addition, the
character set is disabled for the normal model.
OEM FONT = DISABL*
OEM FONT = ENABLE
The Brougham bitmap font of 10 pitch and 12 pitch is built in due to the user's
request.
BROBITM = DISABL*
BROBITM = ENABLE
ISRFONT = DISABLE
ISRFONT = ENABLE
Though it was necessary to select and print the cartridge font of Courier for the US
customer, the 300dpi bitmap font could not be selected because the priority of the
font selection was low in rank. Since the current model is compatible with HP
LaserJet 4, the setting is added, which disables the compatibility with HP LaserJet 4
and makes the priority of the 300dpi bitmap font high.
3B PRIO = LOW *
3B PRIO = HIGH
Disables to select the European character.
Enables to select the European character.
Disables the internal 10/12 pitch Brougham bitmap
font.
Enables the internal 10/12 pitch Brougham bitmap
font.
Normal mode
Israel mode
Makes the priority of selection for the 300dpi bitmap
font standard (low) in the font setting.
Command: <ESC><CR>!1T
Makes the priority of selection for the 300dpi bitmap
font high in the font setting.
Command: <ESC><CR>!2T
A-26