Install The Opc Belt Cartridge - Brother HL-3450CN Service Manual

NOTE:
The retainer lock levers for the fuser cleaner and oil bottle are located as shown in the figure
below;
3.2

Install the OPC Belt Cartridge

N
Do not directly touch the OPC belt surface with bare
hands or gloves.
N
If the belt is exposed for more than two minutes to a light
source of 800 lux, the belt may be damaged.
(1) Open the front cover and the top cover
by releasing the latches.
When installing or removing the OPC
belt, be sure to open the front cover first.
Failure to do so will cause the OPC belt
to be damaged due to contact with the
toner cartridges.
Retainer lock levers
Fuser cleaner
Oil bottle
Retainer lock levers
Fig. 3-6
PRECAUTION
PRECAUTION
Front cover
3-9
HL-3450CN SERVICE MANUAL
Top cover
Fig. 3-7