Brother HL-3450CN Service Manual page 355

APPENDIX
PAPER&TRAY SIZE
Specifies the default paper size.
DEF PAPER =LT
DEF PAPER =A4
PARALLEL MENU
Changes the signal timing of the Centronics interface
PARALLEL TIMING
STB / ACK DELAY
INPUT PRIME
REPRINT ON/OFF
Specifies that the reprint function is enabled or disabled forcedly.
REPRINT = ON*
REPRINT = OFF
AUTO HRC OFF
Specifies that the smoothing control is enabled or disabled automatically depending on
the contents of the file.
AUTO HRC = OFF*
AUTO HRC = ON
The default paper size is letter for the US and Canada
models.
The default paper size is A4 for the other models.
CDCC PSW = L The BUSY signal gets high when the STROBE signal goes
up.
CDCC PSW = H* The BUSY signal gets high when the STROBE signal goes
down.
CDCC BSSL = H The ACK signal is output when the BUSY signal goes down.
CDCC BSSL = L* The ACK signal is output before the BUSY signal goes down.
INPUT PRIME = OFF* The INPUT PRIME signal does not reset the printer.
INPUT PRIME = ON
The reprint function is enabled or disabled following the
setting of the user menu.
The reprint function is enabled forcedly.
The INPUT PRIME signal resets the printer.
A-28