Brother HL-3450CN Service Manual page 346

4) Paper cassette
i) Remove the paper cassette from
the printer and remove paper from
the cassette.
ii) Vacuum up any paper dust in the
paper cassette.
iii) Reinstall the paper cassette.
6.6 Packing
1) Re-install the fusing unit into the
printer.
i) After setting the fusing unit in place,
lightly press down the unit to firmly
connect it to the connector on the
base.
ii) Tighten the securing screws while
pressing down the fusing unit.
iii) Close the top cover.
2) Check the following items are packed
in the starter kit packing;
Four toner cartridges (K, Y, M, C),
OPC belt cartridge, Oil bottle, Fuser
cleaner. (Refer to the figure on the
right.)
3) Put the printer into the polyethylene
bag.
Media cassette
Fusing unit
Starter packing
sleeve
Starter kit
packing (U)
Media cassette
Oil bottle
Fuser cleaner
A-19
HL-3450CN SERVICE MANUAL
Fig. A- 24
Fig. A- 25
Starter kit
packing (M)
Toner
cartridge
OPC belt
cartridge
Starter kit
packing (L)
Fig. A- 26