Brother HL-3450CN Service Manual page 139

CHAPTER 5 CONTROL PANEL OPERATION
Code No.
00
01
02
LCD Message
00 READY [*1]
[*2 ][*4]
01 WAIT [*1]
[*2 ][*4]
02 PRINT [*5][*1]
[*2 ][*4]
5-14
Description of Message
x
The Power LED is lit.
x
The engine has completed the
warming-up process and is now ready
to print.
[*1]: Applicable paper feeder is indicated
as follows;
/UPP: Upper cassette
/LF1: Lower cassette (1)
/LF2: Lower cassette (2)
[*2]: Size of the paper loaded in the
upper or lower cassette is indicated
as follows;
Indication is displayed from the left
in the order of the upper cassette,
lower cassette (1) and lower
cassette (2).
LT: Letter size DL: Envelope
EX: Executive size PC: Post card
LG: Legal size CM: Envelope
Commercial #10
A4: A4 size FR: Free size
B5: B5 size LD: Ledger
L+: A3 Nobi A3: A3 size
B4: B4 size
[*4]: The code numbers of consumables
or periodical replacement parts will
be indicated if they have reached
their life or should be replaced now.
If no periodical replacement is
required, there will be no indication
in the LCD.
For details of the periodical
replacement parts, see 36. CLEAR
CARE in the next section.
x
The Power LED is lit.
x
The engine is in the process of
warming-up.
x
For messages [*1], [*2] and [*4] that
appear on the LCD, see the
description for code number 00
above.
x
The Power LED lit.
x
The engine is ready to print.
x
For messages [*1], [*2], [*3] and [*4]
that appear on the LCD, see the
description for code number 00
above.
[*5]: Print color is indicated as follows;
Y: Yellow M: Magenta
C: Cyan K: Black
YM: Yellow & Magenta
YMCK Full Color