Cleaning The Transfer Drum - Brother HL-3450CN Service Manual

2.7

Cleaning the Transfer Drum

The transfer drum should be cleaned according to the periodic maintenance cleaning cycle
set out in Table 6-3.
Tools to Prepare
Cotton cloth (2
Cleaning Procedure
(1) Turn off the power supply.
(2) Open the rear access cover.
(3) Clean the surface of the transfer drum with a dry or damp cotton cloth.
Be sure to dry the transfer drum completely after cleaning it with a damp cotton cloth.
Do not clean the transfer drum by using solvent.
Do not touch the transfer drum surface with bare hands, or scratch it.
3 pieces)
Fig. 6-8
6-15
CAUTION
HL-3450CN SERVICE MANUAL
Transfer drum