CHAPTER 3 INSTALLATION
Fig.3-1 shows the basic layout of the printer set-up location that is suitable for smooth
operation and maintenance of the printer.
A space in front of the printer of 70cm is necessary to open the front cover.
A space at back of the printer of 20cm is necessary to open / close the rear access cover.
The space on both sides of the printer of 10cm is necessary for general access.
Table
20cm (8")
80cm (32")
Fig. 3-1
50cm (20")
20cm (8")
16cm
(6.4")
70cm
(28")
10cm (4")
3-4
70cm
(28")