Base Cover 3 (R) - Brother HL-3450CN Service Manual

4.1.2

Base cover 3 (R)

(1) Remove the set screws BT4x10 (2 pcs.) from the base cover 3 (R).
(2) Remove the base cover 3 (R) from the base.
N
When assembling the base cover, insert the leading edge of the base cover 3 (R) into the
two hooks provided at the bottom (left and right) of the base plate.
N
Ensure that the projecting part (
the base plate bottom.
Fig. 7-9
PRECAUTION
) of the base cover 3 (R) goes into the three holes in
Hole
(projecting part)
(hook)
Fig. 7-10
7-11
HL-3450CN SERVICE MANUAL
Base cover 3 (R)
Base plate
Base cover 3 (R)