Brother HL-3450CN Service Manual page 358

JOB TIMEOUT SEL
Specifies the setting of the job timeout.
Though the job timeout has been set to 5 minutes in the PJL emulation since the HL-1260
printer, the setting to disable the timeout is added due to the user's request.
TIME OUT = ON*
TIME OUT = OFF
DEMO PAGE ON/OFF
Specifies that the demo page is printed or not.
When the setting is OFF, the demo page is deleted from the control panel and printer Web
page, and the demo page is not printed by the PJL command and MIB.
DEMO PAGE = ON*
DEMO PAGE = OFF
JOB CANCEL TIME
Specifies the timeout of job cancel. (1~255)
TIME OUT = ???sec
PSCOPYPAGE
PSCOPYPAGE = L3*
PSCOPYPAGE = L2
Switches the copy page operator in the PS mode between Level2 and Level3.
@PJL DEFAULT PSCOPYPAGE = L3, L2
@PJL SET PSCOPYPAGE = L3, L2
@PJL DINQUIRE PSCOPYPAGE
@PJL INQUIRE PSCOPYPAGE
APPLEUSBPS
BINARY = OFF*
BINARY = ON
Enables to print the PS pure binary data through the Mac USB interface.
@PJL DEFAULT APPLEUSBPS = ON / OFF
@PJL SET APPLEUSBPS = ON / OFF
@PJL DINQUIRE APPLEUSBPS
@PJL INQUIRE APPLEUSBPS
Enables the job timeout.
Disables the job timeout.
A-31
HL-3450CN SERVICE MANUAL