Appendix 6 - Brother HL-3450CN Service Manual

APPENDIX

APPENDIX 6.

When re-packing the printer before shipping, be sure to follow the steps and cautions
below. Failure to do so will cause toner or oil spill in the printer and severe damage to
the printer.
6.1 Toner Cartridge
1) Open the front cover and remove all the
toner cartridges (K, Y, M, C) from the
printer.
2) Put the original protective cover (orange)
onto each cartridge and put it into the
polyethylene bag.
3) Put the toner cartridges into the original
starter kit packings.
x
If you do not have the original protective cover, cover each toner cartridge with bubble
sheet to protect the developer roller.
x
If you do not have the original starter kit packing, pack each toner cartridge firmly with
bubble sheet and put them into the outer carton.
RE-PACKING INSTRUCTIONS
PRECAUTION
Starter kit
packing (U)
CAUTION
A-14
Protective
cover
Fig. A- 8
Toner
cartridge
Starter kit
packing (L)
Fig. A- 9