Cleaning The Transfer Drum - Brother HL-2400C Service Manual

1.2.7

Cleaning the Transfer Drum

The transfer drum should be cleaned according to the periodic maintenance cleaning
cycle set out in Table 6-3.
<Tools to Prepare>
Cotton cloth (2 ∼ 3 pieces)
<Cleaning Procedure>
1) Turn off the power supply.
2) Open the rear access cover.
3) Clean the surface of the transfer drum with a dry or damp cotton cloth.
• Be sure to dry the transfer drum completely after cleaning it with a damp cotton
cloth.
• Do not clean the transfer drum by using solvent.
• Do not touch the transfer drum surface with bare hands, or scratch it.
Fig.6-8
CAUTION
VI-12
Transfer Drum