Cleaning The Drum Unit - Brother HL-L9200CDWT User Manual

Routine Maintenance

Cleaning the drum unit

If your printout has coloured, white, or black dots at 94 mm intervals, the drum may have foreign material,
such as glue from a label stuck on the drum surface. Follow the steps below to solve the problem:
a
Make sure the machine is in Ready mode.
b
Press .
c
Press Machine Information > Drum Dot Print.
d
Press OK to print the drum dot check sheet.
e
Press and hold down
f
Press the front cover release button and pull open the front cover.
g
Hold the blue handle of the drum unit. Pull the drum unit out until it stops.
to turn the machine off.
5
5
163