List Of Maintenance-Mode Functions - Brother CB200 Service Manual

4.2 LIST OF MAINTENANCE-MODE FUNCTIONS

Entry
Open the
paper
compartment
cover.
Hold down
COPY ALL
and FEED
keys for 15
seconds.
Open the
paper
compartment
cover, then
press COPY
and FEED
keys for 15
seconds.
Maintenance-mode Functions
Paper
Press:
compartment
cover
COPY ALL key
Opened COPY key
FEED key
COPY ALL key
Closed
COPY key
FEED key
COPY ALL key
COPY key
Opened
FEED key
COPY ALL key
Closed COPY key
FEED key
Setting of the scanning
compensation parameters stored in
the EEPROM (involving home
positioning of the copyboard
screen)
Scanning contrast adjustment
Automatic setting of the scanning
compensation parameters stored in
the EEPROM
Dump (including page length
setting, error code, and scanning
compensation data)
Test pattern print
Exit from the maintenance mode
Reserved.
(Never use this function.)
Operational check of keys and
LEDs on the control panel
Sensor operational check and
EEPROM customization (for page
length)
Exit from the maintenance mode
Exit from the maintenance mode
Exit from the maintenance mode
IV - 2
Function
[Function code 55]
[Function code 07]
[Function code 02]
[Function code 05]
[Function code 09]
[Function code 13]
[Function code 32]
Refer to:
Sect.
4.3.1
Sect.
4.3.2
Sect.
4.3.3
Sect.
4.3.4
Sect.
4.3.5
Sect.
4.3.6
Sect.
4.3.7