Preparation; How To Access The Object Component - Brother CB200 Service Manual

n n

Preparation

Prior to proceeding to the disassembly procedure,
(1) Unplug
- the AC cord and AC adapter and
- the optional PC interface cable if connected. (Not shown below.)
(2) Remove the tray and recording paper.
(3) CP2000/CB200: Take down the assembly of the copyboard and printer from the easel stand.
(4) Disconnect the printer-copyboard interface cable from the printer and then remove the four
decorative screws to separate the printer from the copyboard.
n n

How to Access the Object Component

• On the next page is a disassembly order flow which helps you access the object components.
To remove the main PCB, for example, first find it on the flow. You need to remove the printer,
printer base unit, printer support, and sub cover so as to access the main PCB.
• Unless otherwise specified, the disassembled parts or components should be reassembled in
the reverse order of removal.
III - 3