Brother CB200 Service Manual page 55

(4) As illustrated below, put the new white sheet on the old one with the ruled side facing up and
black HP marks facing towards the left.
(5) Tape the edge of the new white sheet to the cut edge of the old one.
(6) Pull the other edge of the old white sheet in the direction of the black arrow. This will set the
new white sheet around the sheet backup board.
(7) To replace the sheet backup board, remove two screws (one cup S taptite screw, M3x10 from
each side frame) and pull out the board together with its supports. Set a new board back into
place together with the removed supports and tighten two screws.
III - 37