Removing The Pipe Holder Stoppers, Pipe Spacer L, Lower Pipe And Its Holders - Brother CB200 Service Manual

(2) Remove the lower frame (one washer S taptite screw, M3x10 and two bind B taptite screws,
M3x8) and then pull it out.
NOTE: When placing the copyboard rightside up after removing the lower frame, apply any
pad under the copyboard to protect the grip as shown below.

Removing the pipe holder stoppers, pipe spacer L, lower pipe and its holders

(3) Remove two pipe holder stoppers (one cup S taptite screw, M3x8 from each stopper).
III - 30