Cisco MWR 1941-DC - 1941 Mobile Wireless Router Software Configuration Manual page 149

Chapter 6 Configuring the MWR 1941-DC in a Cell Site DCN
!
!
line con 0
exec-timeout 0 0
transport input none
line 161
no exec
transport preferred none
transport input telnet
transport output none
stopbits 1
line aux 0
line vty 0 4
password lab
login
!
end
Without an Unnumbered IP Address
The following example shows a Cisco router configured without an unnumbered IP address:
uut5-2621#s run
Building configuration...
Current configuration :1318 bytes
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname uut5-RouterC
!
logging rate-limit console 10 except errors
no logging console
!
ip subnet-zero
!
no ip finger
no ip domain-lookup
!
no ip dhcp-client network-discovery
!
interface FastEthernet0/0
ip address 10.2.130.5 255.255.0.0
duplex auto
speed auto
no cdp enable
!
interface Serial1/0
ip address 172.128.12.1 255.255.255.252
!
router rip
network 10.0.0.0
!
ip kerberos source-interface any
ip classless
ip route 0.0.0.0 0.0.0.0 10.2.0.1
no ip http server
!
no cdp run
OL-11503-01
Configuring the NM-AIC-64, Contact Closure Network Module
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
6-41