Where To Go Next - Cisco MWR 1941-DC - 1941 Mobile Wireless Router Software Configuration Manual

Chapter 3 First-Time Configuration
no ip address
!
end
To complete your router configuration, do the following:
A setup command facility prompt asks if you want to save this configuration.
Step 1
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
Enter your selection [2]:
Building configuration...
Use the enabled mode 'configure' command to modify this configuration.
Press RETURN to get started!
If you answer no, the configuration information you entered is not saved, and you return to the router
enable prompt. Type setup to return to the System Configuration Dialog.
If you answer yes, the configuration is saved and you are returned to the EXEC prompt.
When the messages stop displaying on your screen, press Return to get the command line prompt.
Step 2
The
completed a basic router configuration. However, this is not a complete configuration. You must
configure additional parameters using the Cisco IOS software CLI as described in Part 2,
the MWR 1941-DC Router in an

Where to Go Next

At this point you can proceed to the following:
•
•
•
•
These publications are available on the Documentation CD-ROM that came with your router, on the
World Wide Web from Cisco's home page, or you can order printed copies.
OL-11503-01
prompt indicates that you are now at the command-line interface (CLI) and you have just
1941-1>
Part 2, "Implementing the MWR 1941-DC Router in an IP-RAN"
how to complete the configuration of the interfaces, routing protocols, and other features when
implementing the MWR 1941-DC router in an IP-RAN.
Part 3, "Configuring the MWR 1941-DC in a Cell Site DCN"
to complete the configuration of the interfaces, routing protocols, and other features when
implementing the MWR 1941-DC router in an Cell Site DCN.
The Cisco IOS software configuration guide and command reference publications for more
advanced configuration topics.
The Cisco 10000 ESR Quality of Service Documents for more information on configuring QoS.
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
IP-RAN".
Where to Go Next
"Implementing
for information on and details on
for information on and details on how
3-13