Show Redundancy - Cisco MWR 1941-DC - 1941 Mobile Wireless Router Software Configuration Manual

show redundancy

show redundancy
To display information about the current redundant configuration and recent changes in states, use the
show redundancy command in EXEC mode.
Syntax Description
This command has no attributes.
Command Modes EXEC
Command History Release
12.2(8)MC2
12.2(15)MC1
12.3(11)T
Usage Guidelines
In the standby group name group-name command, if you omit the group-name or if you enter a group
name that doesn't begin with one or two, the configuration will fail and there will be a mismatch in the
information displayed by the show redundancy and show standby commands.
Examples
The following is an example of the output generated by this command.
show redundancy
MWR1900 is the Active Router
Previous States with most recent at bottom
INITL_INITL
LISTN_INITL
LISTN_LISTN
SPEAK_LISTN
SPEAK_SPEAK
STDBY_SPEAK
ACTIV_SPEAK
ACTIV_STDBY
ACTIV_ACTIV
INITL_ACTIV
INITL_INITL
INITL_LISTN
LISTN_LISTN
LISTN_SPEAK
SPEAK_SPEAK
SPEAK_STDBY
SPEAK_ACTIV
STDBY_ACTIV
ACTIV_ACTIV
INITL_ACTIV
INITL_INITL
INITL_LISTN
LISTN_LISTN
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
5-22
show redundancy
Modification
This command was introduced.
This command was incorporated in Cisco IOS 12.2(15)MC1.
This command was incorporated in Cisco IOS 12.3(11)T.
Dec 31 19:00:00.000
Feb 28 19:00:15.568
Feb 28 19:00:15.568
Feb 28 19:00:18.568
Feb 28 19:00:18.568
Mar 19 08:54:26.191
Mar 19 08:54:26.191
Mar 19 08:54:26.191
Mar 19 08:54:26.191
Mar 19 08:56:22.700
Mar 19 08:56:22.700
Mar 19 08:56:28.544
Mar 19 08:56:28.652
Mar 19 08:56:31.544
Mar 19 08:56:31.652
Mar 19 08:56:34.544
Mar 19 08:56:34.544
Mar 19 08:56:34.652
Mar 19 08:56:34.652
Mar 19 10:20:41.455
Mar 19 10:20:41.455
Mar 19 10:20:49.243
Mar 19 10:20:49.299
Chapter 5 Cisco MWR 1941-DC Router IP-RAN Command Reference
OL-11503-01