standby use-interface
Examples
The following example specifies loopback101 as the health interface and loopback102 as the revertive
interface.
standby use-interface loopback101 health
standby use-interface loopback102 revertive
standby use-interface multilink1 backhaul
Related Commands
Command
mode y-cable
redundancy
standalone
standby
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
5-26
Chapter 5
Cisco MWR 1941-DC Router IP-RAN Command Reference
Description
Invokes y-cable mode.
Invokes redundancy mode.
Specifies whether the MWR 1941-DC router is used in a redundant or
stand-alone configuration.
Sets HSRP attributes
OL-11503-01