Cisco MWR 1941-DC - 1941 Mobile Wireless Router Software Configuration Manual page 101

Chapter 5 Cisco MWR 1941-DC Router IP-RAN Command Reference
Table 5-2
Table 5-2
Field
Total output packets
Multiplexed output packets
Output byte count
Total input packets
Errored input packets
Efficiency improvement factor
The efficiency improvement factor is calculated as follows:
Multiplex efficiency improvement factor = 100 * (Total bytes saved) / (Total bytes received)
Where total bytes saved = bytes_received_at_muxer - bytes_sent_at_muxer.
Demultiplex efficiency improvement factor = 100 * (Total bytes saved) / (Total bytes sent)
Where total bytes saved = bytes_sent_at_demuxer - bytes_received_at_demuxer.
Related Commands Command
ppp mux
OL-11503-01
describes the significant fields shown in the display.
show ppp mux Field Descriptions
Description
Enables PPP multiplexing/demultiplexing
Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide
Description
Number of outbound packets
Number of outbound multiplexed superframes
Number of outbound bytes
Number of inbound packets
Number of inbound packets discarded due to error
Percentage of efficiency improvement achieved
through multiplexing or demultiplexing
show ppp mux
5-21