Ethernet Client Filter - Billion BiPAC 7401VP User Manual

Ethernet Client Filter

The Ethernet Client Filter supports up to 16 Ethernet network machines that helps you to manage
your network control to accept traffic from specific authorized machines or can restrict unwanted
machine(s) to access your LAN.
There are no pre-define Ethernet MAC address filter rules; you can add the filter rules to meet your
requirements.
Ethernet Client Filter: Default setting is set to Disable.
Allowed: check to authorize specific device accessing your LAN by insert the MAC
Address in the space provided or click
Blocked: check to prevent unwanted device accessing your LAN by insert the MAC
Address in the space provided or click
The maximum client is 16. The MAC addresses are 6 bytes long; they are presented only in
hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
(Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included)
Candidates: automatically detects devices connected to the router through the Ethernet. .
→ Active PC in LAN
Chapter 4: Configuration
VoIP/(802.11g) ADSL2+ Router
. Make sure your PC's MAC is listed.
. Make sure your PC's MAC is not listed.
30