Qos - Quality Of Service; Prioritization - Billion BiPAC 7401VGP R3 User Manual

QoS - Quality of Service

QoS function helps you to control the network traffic of each application from LAN (Ethernet and/
or Wireless) to WAN (Internet). It facilitates you the features to control the quality and speed of
throughput for each application when the system is running with full upstream load.
These are the items within the QoS section:
IP Throttling (bandwidth management).

Prioritization

There are three priority settings to be provided in the Router:
High
Normal (The default is normal priority for all of traffic without setting)
Low
The utilization percentage of each priority settings are High (60%), Normal (30%) and Low (10%).
To delete an application, you can click on the Delete radio button of the application and then click
the Edit/Delete button.
Name: User defined description to identify the new policy/application created.
Time Schedule: Schedule your prioritization policy.
Priority: The priority given to each policy/application. Its default setting is set to High. You may
adjust this setting to fit your policy / application.
Protocol: The name of the supported protocol.
Source IP Address Range: The source IP address or the range of the packets to be monitored.
Source Port: The source port of the packets to be monitored.
Prioritization, Outbound IP Throttling & Inbound
119