Extended Ptt; Repeating A Voice Announcement; System Settings - Becker Mexico 7948 Operating Manual

Settings

Extended PTT

If the function is active, voice mode can
be activated automatically by pressing
, , ,
and you can input a voice command
directly.
Note:
The abbreviation PTT stands for "Push
To Talk".
Select PTT extended in the voice mode
!
settings.
7012
Turn the rotary control/push button
!
to switch the function on ( ) or off
( ).
178

Repeating a voice announcement

If the function has been switched on and
route guidance is active, the last naviga-
or tion announcement can be repeated or an
updated navigation announcement out-
put by pressing
Repeat voice announcement
! Select
voice mode settings.
7013
! Turn the rotary control/push button
to switch the function on ( ) or off
( ).

System settings

You can configure various basic settings
on your Mexico to meet your require-
ments in the system settings.
The following possible settings are
.
available:
in the
For Audio
• Setting for speed-dependent increase
in volume with
• With
the hands-free microphone for tele-
phone calls can be set.
• Using
you can specify whether your vehicle
is a left-hand drive or right-hand drive
vehicle.
• Setting for acoustic signal volume
with
• You can use
whether a change in volume should be
displayed in graphics format.
• Setting for the volume level of digital
to analogue audio sources with
level
• You can use
lect whether the audio volume is to be
lowered when the reverse gear is en-
gaged.
:
Speed-dependent volume
Micro sensitivity , the sensitivity of
Installation position of microphone
Volume of warning tones
Display volume
to select
Digital
Supports parking aid to se-
.
,