Becker Indianapolis 7920 Operating Manual

Navigation CD 2.X
If you received this operation guide up- Navigation mode
date when purchasing a new unit, the
functions and modifications described
from Page 11 are intended as a supple-
ment to your operation guide.
If you received this operation guide up-
date together with an update CD, the up-
date procedure and the new functions
and modifications to the previous mode
of operation are described on the follow-
ing pages.
Subject to errors and technical changes
Installation update CD 2.X
X Remove the old navigation CD.
X Insert the new 2.X navigation CD.
After a short time, the following display
or a similar display appears.
X Then turn the right rotary control
select NEW VERSION: UPDATE
X Press the right-hand rotary control
Notes:
• Select OLD VERSION:
abort the update.
• Press the left rotary control
play information on the new version.
10
The navigation and radio software is
now updated.
Progress bars appear on the display
while the update is taking place.
Note:
While the navigation and radio softwa-
re is being updated the
• vehicle ignition should be switched on.
to
• vehicle must not be moved.
.
After the radio software has been updat-
.
ed the software will be restarted (reset).
The navigation software update then
starts. The update has been completed
BACK to
when navigation mode can be selected
again.
to dis-
Copyright by HARMAN/BECKER Automotive Systems GmbH, D-76303 Karlsbad