Adding Parties; Private Call - Becker Mexico 7948 Operating Manual

Once the connection to the desired party
has been established, this call is also the
active call.
In the Options menu, select the
!
ence
entry.
5080
The call on hold and the active call are
then combined in a conference call.

Adding parties

You are already conducting an active
conference call and want to add another
party to the call.
In the status display, press the rotary
!
control/push button .
The Options menu appears.
! Then select the Dial entry.
! Establish a connection to the desired
participant.
Once the connection to the desired party
has been established, this call is also the
active call. The conference call is on
hold in the background.
]onfer-
! In the Options menu, select the
ence
entry.
The new call is added to the conference
call on hold. The conference call is then
re-activated.

Private call

You want to talk to one of the confer-
ence call participants without the other
parties listening in. In this case, there
must be no other call on hold in the
background.
Press or
!
party of the conference call is dis-
played in the centre of the screen.
5081
In the Options menu, select the
!
nect
entry.
]onfer-
Note:
Disconnection may not be supported by
all providers that permit conference
calls.
You can now speak privately with the
selected conference call participant.
The conference call is on hold in the
background.
You can now also switch back and forth
between the private call and the remain-
ing conference call as described in "Tog-
until the desired
gling" on page 110.
In the Options menu you can add the pri-
vate call to the conference call again by
selecting
Telephone mode
Discon-
]onference .
111