Software Update - Becker Mexico 7948 Operating Manual

Software update

A software update for your Mexico can
be carried out by inserting a memory
card. New functions for your Mexico
can be provided by means of a software
update.
Note:
Before carrying out an update, switch
the vehicle ignition on and leave it on
during the update.
The Mexico cannot be used during the
software update.
Insert the memory card containing the
!
software update into the correspond-
ing slot.
After a short time, the following display
appears:
7026
! Select Yes to install the update or
continue without updating.
The software update starts when
selected.
7027
A progress indicator informs you of the
progress of the installation.
The following message appears once the
update has been completed successfully.
7028
Press the right-hand rotary control/
!
push button
to disappear automatically after a few
seconds.
The Mexico switches itself off briefly and
then back on again.
The software update is now complete.
No to
Yes is
or wait for the menu
Settings
187