Settings; Traffic Announcements - Becker Mexico 7948 Operating Manual

Settings

You can make various settings for navi-
gation in the settings.
! In the Navigation main menu, select
the Setting entry.
2085
! Confirm your selection by pressing
the rotary control/push button
2086
The Settings menu appears.
Turn the rotary control/push button
!
to select one of the following options:
Traffic messages ,
Announce arrival time
,
Show speed limits ,
ETA setting or
Unit of measure
! Confirm your selection by pressing
the rotary control/push button
• Traffic messages
You can specify whether or not traffic
announcements should be read out
automatically by the unit and, if so,
which ones.
• Announce arrival time
You can specify whether the calculated
time of arrival should be announced
automatically once the route has been
.
calculated/recalculated.
• Show speed limits
If the function is on, the system will
inform you of the maximum permissi-
ble speed limit for the route along
which you are travelling during route
guidance, insofar as this information
is available.
• ETA setting
You can configure the calculation of
the ETA. ETA stands for Estimated
Time of Arrival.
Navigation mode
• Unit of measure
. You can convert the calculation of the
distances from metric (display in metres
and kilometres) to imperial (display in
yards and miles) system and vice versa.

Traffic announcements

You can specify whether or not traffic
announcements should be read out auto-
matically by the Mexico and, if so,
which ones.
In the Settings menu, select the
!
messages
entry.
2086
Confirm your selection by pressing
!
the rotary control/push button
2087
! You may now select
sages , On route only
Traffic
.
Announce mes-
or Warnings only .
57