Ending A Call; Holding - Becker Mexico 7948 Operating Manual

Ending a call

Active calls/calls on hold can be termi-
nated. For this purpose, the status dis-
play must be first be accessed.
5076
! Press the rotary control/ push button
.
The Options menu appears.
5077
! Select the Hang up entry.
Press the rotary control/ push button
!
.
The call is terminated.

Holding

(internal phone and SIM-Access only)
With the Hold function you can place an
active call or an active conference call
into a "queue". You can then make an-
other call or have a conversation in your
vehicle without the other party hearing.
You are currently conducting a call (or
a conference call).
! In the status display, press the rotary
control/push button .
5078
The Options menu appears.
! Then select either Stop or Dial
When selecting
the current conference call is placed in
the "queue". The
hold and the
ence call on hold is displayed in the sta-
tus display.
Note:
To reactivate the call or conference call
on hold, press the rotary control/push
button in the status display again.
Then in the Options menu, select
vate .
The call or conference call is then active
again.
When selecting
current conference call is placed in the
.
"queue".
Then the following menu appears.
Telephone mode
Stop , the active call or
symbol for a call on
symbol for a confer-
Acti-
Dial , the active call or the
109