External Points Of Interest - Becker Mexico 7948 Operating Manual

External points of interest

You can select an external POI as a main
destination or as a stopover.
! Insert a storage medium with external
POIs.
In the Navigation main menu, select
!
the Point of Interest (external)
Note:
The Point of Interest (external)
can only be selected if, for example, a
storage medium with external points of
interest has been inserted and recog-
nised.
2102
Confirm your selection by pressing
!
the rotary control/ push button
or if route guidance is already active
! In the navigation status display, press
the rotary control/push button
2038
The Options menu appears.
! Select the Stop-over
! Confirm your selection by pressing
entry.
the rotary control/ push button
Select the Point of Interest (external)
!
menu item
try.
2103
Confirm your selection by pressing
!
the rotary control/ push button
2104
.
The POI menu appears.
Turn the rotary control/push button
!
to select one of the following op-
tions:
.
In vicinity of location
In vicinity of destination
.
Note:
The
be selected if route guidance is active.
! Confirm your selection by pressing
the rotary control/ push button
entry.
• In vicinity of location
.
You can select a POI in the vicinity of
the vehicle. When you make your se-
en-
lection, the unit will tell you in which
direction the POI is located and how
far away it is.
• In vicinity of destination
You can select a POI in the vicinity of
the destination. This provides no infor-
mation on the direction and distance.
.
Described below is how to opeate it via
the In vicinity of location
or
Navigation mode
In vicinity of destination entry can only
menu item.
.
43