Voice mode
Example operation in
radio mode
The following description assumes that
you are in the status display for radio
mode. The signal tone will sound and
commands will be repeated only if the
functions described in "Voice output"
on page 177 have been activated.
You wish to set the VHF waveband on
the basis of quality.
!
Press
.
9001
You will hear a signal tone #.
!
!
Say the command [Open] radio
menu.
192
9002
The radio menu appears.
"
Radio menu
You will hear a signal tone #.
!
!
Say the command Waveband.
9003
The Waveband menu appears.
"
Waveband
You will hear a signal tone #.
!
!
Say the command FM quality.
9005
VHF is switched on based on quality and
the Fast Access menu appears.
"
FM quality
You will hear a signal tone #.
!
!
Say the command Status.
You are now in the status display for the
radio function.